Google Ads
viernes, septiembre 22, 2023
HomeVintage CarsVinyl roof coverings were created to be retro in 1925. Now the...

Vinyl roof coverings were created to be retro in 1925. Now the on-and-off fad is making a comeback. A brief history…

Google Ads

Above: the new-for-1928 Ford Model A coupe is an example of the first type of automotive vinyl roof popular during the late ’20s and early ’30s designed to evoke memories of horseless carraiges.  Although it looks like a fully retractable convertible roof, it is fixed in place and cannot be lowered. One might say these roofs were the first form of “retro” auto design. (Photo credit: R Spiegelman)

Coming across a can of old glue thinner in the garage recently made me recall how I had used it to remove the padded vinyl roof on a ’79 Cadillac Sedan deVille I once owned.  Which got me thinking about vinyl roofs in general and how far back in classic car culture they really go.

My former 1979 Cadillac Sedan de Ville with vinyl padded roof at a car show in 2001.  (Photo credit: S. Connor)

98 percent of de Villes made during that era were equipped with padded vinyl on the roof.  Cadillacs of my vintage with bare painted roofs were rare, so I always noticed when one passed by.  I always felt when the roofs of these cars were unadulterated by vinyl, the clean lines GM designers endowed them with suddenly showed to a greater extent.

Removing the top was a painstaking process to ensure paint underneath did not get damaged.  Because my car was clean and garage-kept there was no rust beneath the layer of padding.  After buffing off hardened glue, the original paint looked almost new and my de Ville shined with new-found elegant simplicity.


  • I. Brief History of vinyl roofs through the years.
  • II. Pictures of the types of vinyl roofs.
  • III. Slide show of vinyl-covered cars from the 1920s through today.


The earliest application of vinyl to the roof of automobiles in mass production was in the late 1920s, often used with “landau bars” as decorative trim to recreate the look of adjustable canopy tops on horse-drawn carriages.  Two-door coupes from the 1928 Ford Model A to Packards quickly bought into this look, which gave the buyer an ambience of luxury while at the same time stirring comforting memories in their minds of youth twenty to thirty years earlier when carriages were in vogue.

1934 Chrysler Airflow sedan.

These style of roof coverings (some also were formed with canvas or even leather) became almost the norm until the introduction of the 1934 Chrysler Airflow, which created a new look of smooth lines and rounded, aerodynamic curves.  The appearance of the Airflow’s modern, integrated metal roof was key to creating a look of pure, smooth lines unadulterated by lumps or bumps.  As the original “aero” look of this car inspired other designers to create similar designs, vinyl roofs became yesterday’s news.

Google Ads

1950 Mercury Monterey coupe.

Uncovered metal roofs became the mainstay until 1950.  That year, Ford offered vinyl on coupe versions of its own Crestliner, Mercury Montereys, Lincoln Lidos, and Cosmopolitians to simulate real convertibles.  Kaiser and Frazer brands offered them as well on all models.  They didn’t catch on and were dropped across the board at the end of 1951.

1958 Cadillac Eldorado Brougham.

Vinyl was dead again until resurfacing briefly in 1957 for two to three years on limited edition, high-end Cadillac Eldorado Broughams, Chrysler Imperials, and Lincoln limousines.  While typical 1950s cars often featured two-tone paint schemes and roofs painted a different color to mimic convertible tops, it should be noted that roof surfaces were usually painted metal.

If vinyl evoked a classic retro form of elegance in the 1920s, in the 1960s it was to be about the complete opposite.  It would be about making a new era of longer-lower-wider car designs coming out of Detroit hip and sporty in a “mod”, “now” kind of way.

1962 Ford Thunderbird Landau edition advertisement.

General Motors considered public reaction to the new-age vinyl look so favorable on the 1957-58 Cadillac Eldorado Brougham model (priced twice as high as the next Caddy), it began featuring full vinyl as a factory option on Oldsmobile Starfires and Buick Skylarks in 1962.  Ford also introduced the option on its 1962 T-Bird “Landau” coupe.

For 1963, G.M. full-size cars such as Chevy Impalas, Pontiac Grand Prixs and Cadillacs offered the option.  Ford tested the waters on it’s ’63 Galaxie model and found many takers…and when they introduced the 1964 Mustang, vinyl was there too.

Until the mid-1960s, vinyl was associated primarily with coupes but by about 1965 it began to proliferate more on four-door sedans also.  At the end of the decade it was available on every type of model from muscle cars to station wagons.  By 1970, even economy model Ford Pintos featured vinyl options.

1976 Cadillac Fleetwood Brougham padded vinyl roof covering

Vinyl material used for roof coverings tended to be elk-grain in texture stretched form-fittingly tight in a thin, unpadded layer until the mid-1970s.  As General Motors and Ford luxury models featured more squared-off designs, their straight lines lent themselves better to the next generation of the vinyl roof – a thick layer of flexible padding covered with a smooth, glossier layer of material.

Like most American luxury cars of the 1980s, 100% of Lincoln Town Cars from 1980-89 were equipped with padded vinyl roofs.

As the 1980s became the 1990s and traditional American luxury cars all changed from square designs to rounded ones, vinyl roofs seemed out of place again they way they did in 1934 and died their hardest death yet.

Today, covering cars with vinyl is coming back in a different form.   Fast becoming a trend today is the practice of heat sealing clear vinyl sections onto all body panels of the car, most often in the form of clear wrap designed to create a dull matte finish.  Popular with owners of high-end Ferraris, Porsches, and other exotic cars, this is justified by the paint protection it offers.  Vinyl can also be used to apply graphics or change the color of a car completely.  Unlike earlier forms of vinyl coverings, modern wraps can be removed with no damage to paint underneath.  (See slideshow for pictures.)


“CANOPY” type roofs cover only the front portion of the roof.  Above, a 1977 Lincoln Mark V Givenchy Edition with a canopy vinyl roof. (Photo credit: Ford Motor Company)

“FULL” – covers the entire roof, including A-pillars. This 1997 Rolls-Royce reminds us that Europeans were equally seduced by vinyl and had a harder time giving it up than Americans did. (Photo credit: W. Quincy)

“HALO” – this type is similar to full vinyl roofs, but the vinyl stops just short of the tops of the side windows and windshield, allowing a “halo” of painted sheet metal to appear between vinyl and glass areas.  This 1971 Ford Torino coupe is an example of how many halo type vinyl roofs looked originally. (Photo credit: T. Sanders)

“LANDAU” – covers only the rear portion of the roof. Landau roofs were used equally on coupes and sedans.  Shown is a 1988 Chrysler Fifth Avenue. This Chrysler trend of integrating part of the rear door with vinyl covering was used on many of their models in the 1980s, and proved quite popular with buyers. (Photo credit: Wikicars)

“UP AND OVER” – Here a 1973 Dodge Charger features a creative vinyl roof covering favored by Chrysler Corporation during the 1970s. (Photo credit: Wikicars)

“PADDED” – This 1979 Cadillac Sedan de Ville’s FULL vinyl roof is an example of the more modern construction of a thick layer of padding covered with a smoother surface material. These were introduced on higher-end American cars in the mid-1970s and became the norm through the 1980s. (Photo credit: Sean Connor)

“SIMULATED CONVERTIBLE” – features vinyl material that simulates the grain of convertible top material, along with metal bars underneath to create a three-dimensional appearance of metal brackets underneath a softtop roof.  Here, a 1980 Chrysler Cordoba is an example of the type of roof covering most popular from 1977-82 when American convertibles were noteably absent from production. (Photo credit: Sean Connor)

“AFTERMARKET” – any creation tacked on after the fact by a company other than the manufacturer, on a car that was not designed with a vinyl roof covering in mind.  They often apply the “convertible look” to four-door sedans such as this 2003 Lincoln Town car shown.  (Photo credit: Sean Connor)

“VINYL WRAPPING” – fast becoming an in-vogue trend today is the practice of applying clear vinyl sections to all body panels of the car.  Shown is a Porsche 911 with clear vinyl wrap desgined to create a dull matte finish. Vinyl can also be used to apply graphics or change the color of a car completely. (Photo credit: S. Lee)




About Sean

Welcome to Classic Cars Today Online! We seek to explore the subject of classic vehicles from the 1950s through today. It is our belief that a car needn’t be old to be respected and admired for graceful design, historical significance, and future value. As founder and Editor-In-Chief, I welcome contributions from you about your own car-related interests and ownership experiences. As far as myself, I’ve worked in the automotive service field and have been a contributor to Autoweek Magazine, The Star, Mercedes Enthusiast Magazine, and more. Currently, I’m a copywriter and own several foreign and domestic classic cars. In my spare time, you’ll find me serving as Technical Editor and officer of several car clubs, being a concours car show judge, and meeting some great folks around the tri-state NY / NJ / Pennsylvania area at car shows. – Sean Connor

Google Ads


Please enter your comment!
Please enter your name here

Most Popular

Recent Comments